Rowenta DW2171 Review

Check out the Rowenta DW2171 review below if you want an affordable steam iron of this established brand name. Not all Rowenta irons are high-end models that cost close to $100. The company also has models that can compete with cheaper irons from brands such as Black and Decker and Sunbeam. While the lower end market is more crowded with plenty of choices, the Rowenta name continues to stand out due its reputation. So, is the DW2171 worth a buy then? Well, let’s take a closer look.

Rowenta DW2171 Review – The Features

Let’s begin by checking out the Rowenta DW2171 main features:

• 1600-watt
• Stainless steel soleplate
• Precision tip
• Autosteam thermostat
• Vertical steaming
• Anti-Calc system
• Anti-drip system
• Auto shut-off
• Self-cleaning system
• Size: 12″ x 5.4″ x 5.2″

==> Check Price On Amazon

One of the main selling points of the Rowenta DW2171 has to be the stainless steel soleplate with 300 microholes for a more even steam distribution. If you check out the lower end steam irons, most of them would not have that many micro steam holes on their soleplate. Even the best $50 steam irons do not have hundreds of microholes to go with their iron. Hence, this Rowenta model is indeed an exception.

The other feature that is worth mentioning would be the auto-steam thermostat. This would automatically control both the right amount of steam and temperature for a given fabric setting. There are 3 settings on the dial and they are Delicate (Silk), Normal (Cotton) and Max (Jeans). The Anti-Calc and self-cleaning systems are also built in for easy maintenance of the iron and to prolong the appliance’s lifespan.

You can use this steam iron for vertical steaming and it has both a burst of steam and a spray mist button. It automatically shuts off very quickly after 30 seconds when it is tipped over or left with its soleplate down. Otherwise, it would shut off after 8 minutes of being left idle. It has an 8.45-ounce water tank and an 8-feet cord.

Rowenta DW2070 vs DW2171

If you compare the Rowenta DW2070 vs DW2171, you will notice that they are highly similar. They have the same shape soleplate with the same number of micro steam holes. In fact, the overall design is very similar at a glance. Hence, it isn’t surprising that the DW2171 is actually a newer version of the Rowenta DW2070. At the time of writing, the DW2070 model isn’t available anymore on many major online shopping sites.

From the product listings of both the models, we suspect that the Rowenta DW2171 has an improved fabric setting feature with the auto-steam thermostat. The manufacturer has probably tweaked it to make the heat and steam output to be more efficient for the different fabric settings.

Other than that, the water tank size, weight, cord length, and other maintenance features have remained more or less the same. Even if there are changes, they are minimal and would largely go by unnoticed.

Rowenta Accessteam DW2171 – Pros

1. Affordable – The DW2171 is reasonably priced and it is definitely one of the cheaper Rowenta irons out there. If you can get it on a discount, the price could be comparable to the Black & Decker D2030 Digital Advantage Iron. Even the Rowenta X-Cel Handheld Steamer is more expensive than this steam iron.
2. Precision tip – A pointed tip design is always good as it is easier to access hard to reach areas around buttons, cuffs, pleats, and collars.
3. Lightweight – While the Rowenta Accessteam is not the lightest of all lightweight irons, it is still easy to use for a steam iron of this size. Weighing less than 3 lbs, it combines ease and efficiency for a less tiring ironing session.
4. Easy-fill water tank – The tank hole is parallel to the soleplate. Hence, you do not need to tilt the iron at a certain angle to fill the water tank like some models do.

And The Cons Are…

1. Not hot enough – This is a 1600-watt iron which should heat up pretty quickly and get hot enough to take out wrinkles on cotton fabrics. However, a significant number of users have complained in their Rowenta DW2171 reviews on Amazon and elsewhere that the iron does not get as hot as it should. As people tend to buy Rowenta irons for its high heat levels, this is indeed a disappointment for many as the heat level is even lower than irons of cheaper brand names.
2. Leaks – This is a common complaint that has obviously not been resolved to many buyers’ satisfaction. Many steam irons leak and Rowenta is not the only brand that faces this issue. While it is certainly not the best steam iron on the market, there is enough complaints on the DW2171 model to make a prospective buyer sit up and take notice and perhaps, consider other alternatives.

Things To Note Before You Buy

From the Rowenta DW2171 review above, it is clear that this is an entry-level model for this brand name. It is not the top-rated Rowenta iron out there but it is more for the budget-conscious buyer.

It doesn’t produce as much steam as, say the Rowenta DW9280 Steam Force, and neither would it get as hot. It is more suited for those who are not as demanding in terms of results because if you want perfection with this iron, you might need a few more passes to get rid of fine lines entirely. This would mean your chore could take a bit longer compared to using a hotter iron with more steam output.

Apart from that, it is to be noted that this model is made in China. Not every Rowenta iron is made in Germany. The high-end ones are but not the low to mid-range models. Of course, people would naturally trust a German-made appliance better than a Chinese-made one. While people tend to think that the latter is of lower quality, bear in mind that the German-made irons are not perfect either. The same complaints of leaks and durability can be seen.

Should You Buy The Rowenta Accesssteam Iron?

If you are a beginner at ironing or it is a task that you don’t do often, then this model would be an acceptable choice. But if you have a heavy ironing load, we wouldn’t recommend this at all.

Any Great Deals For The Rowenta DW2171? Find Out Now On Amazon:

From the Rowenta DW2171 review, you can see that this is a lightweight iron. While it is good for people who have arthritis and other health issues, sometimes heavier irons can be quicker to work with because they tend to be more effective in getting rid of wrinkles. There are trade-offs between a lightweight and a heavy iron, and this is where personal preference comes in. But personally, for heavier ironing loads, we would prefer a heavier steam iron that is more than just an entry-level model.